电线电缆网 > 产品认证 > 请求FFC线20624 20798的标准（完整版）
请求FFC线20624 20798的标准 - 无图版
jiro --- 2008-05-12 10:21:49
1
请斑竹提供一下 FFC线20624 20798的标准和定义给我
我一直想学习 但网上一点资料找不到
谢谢！
cuijiude --- 2008-05-12 12:44:56
2
UNDERWRITERS LABORATORIES INC. APPLIANCE WIRING MATERIAL
Subj. 758 Section 2 Page 20624 Issued: 1989-09-20
Revised: 2003-11-14
Style 20624 Insulated Flat Cable.
_____________________
Rating 80°C, 60 Volts.
___________________________
Conductor 2-150, material not specified. 40-12 AWG flat or round
conductors. Straight or irregular parallel in one plane.
Flat conductors 1.0 - 10.0 mils thick, 10-100 mils wide.
_________________________________________________________
*Insulation (1) PVC, 3.5 mils minimum bonded each side, or
(2) 0.8 mil minimum biaxially oriented PETP
film bonded each side with 0.5 mil polyester adhesive
or
(3) 0.8 mils minimum PETP film or flame retardant
polyester film and 0.5 mil minimum PVC on each side
of conductors laminated together. 10 mils minimum
edge width and 3 mils minimum between conductors.
(4) 0.8 mils minimum polyimide film bonded on each side
of conductors with 0.4 mil minimum polyester
adhesive. Total combined thickness shall be 1.2 mils
minimum.
__________________________________________________________________
Shield (Optional) Metal faced polyester tape.
Drain wire optional.
______________________________________________________________
Standard Appliance Wiring Material UL 758.
________________________________________________________________
Instructions Detailed Examination.
to UL Flexing - flatwise into a U-bend around a 1/8 in.
Representative diameter mandrel.
* Spark Test.
_____________________________________________________________
UL (4) Detailed Examination.
Counter-Check (4) Flexing - Conditioned 7 days in air oven at 113°C,
Program then flexed as above.
* (12) Horizontal Flame Test.
________________________________________________________________
Marking General.
_____________________________________________
Use Internal wiring of Class 2 circuits in electronic
equipment.
［cuijiude 在 2008-5-12 12:48:04 编辑过］
cuijiude --- 2008-05-12 12:45:19
3
UNDERWRITERS LABORATORIES INC. APPLIANCE WIRING MATERIAL
Subj. 758 Section 2 Page 20798 Issued: 1993-06-24
Revised: 2003-06-20
Style 20798 Insulated Flat Cable.
______________________________________________________________________________
Rating 80°C, 60 V.
______________________________________________________________________________
Conductor 2-150, copper foil. Straight parallel in one plane.
Conductors 1.0 - 10.0 mils thick, 10-100 mils wide.
______________________________________________________________________________
Insulation 0.4 mil minimum biaxially oriented PETP (polyester)
film bonded each side with 0.5 mil polyester adhesive. Minimum 13 mils of insulation between the outside edges and the first conductor and 7 mils minimum width between adjacent conductors.
______________________________________________________________________________
Shield (Optional) Metal faced polyester tape. Drain wire optional.
______________________________________________________________________________
Covering (Optional) Polyester (Mylar) film, 0.02 - 4.0 mils
bonded to cable with polyester adhesive.
______________________________________________________________________________
Standard Appliance Wiring Material UL 758.
______________________________________________________________________________
Instructions Detailed Examination.
*to UL Flexibility, Unaged.
Representative Spark Test.
______________________________________________________________________________
UL (4) Detailed Examination.
*Counter-Check (4) Flexibility
Program (12) Horizontal Flame Test.
______________________________________________________________________________
Marking General.
______________________________________________________________________________
Use Internal wiring of Class 2 circuits in electronic
equipment.
jiro --- 2008-05-12 14:58:36
4
谢谢啦！！请问斑竹
FFC线您还有其它资料吗？贴出来可以吗
感谢了