电线电缆网 > 国外线缆 > UL1569 18AWG是什么线规?(完整版)
UL1569 18AWG是什么线规? - 无图版
Crazyxfeng --- 2007-10-22 09:21:00
1
UL1569 18AWG是什么线规?
另外,我看1015 18AWG有好几种线规,哪里有这方面的综合资料呢?
[芝麻开门了 在 2007-10-23 11:00:31 编辑过]
lwgxin --- 2007-10-22 10:46:03
2
是UL758标准的电子线,在UL标准的Stylepage里有详细的规定。
cuijiude --- 2007-10-22 10:51:31
3
UNDERWRITERS LABORATORIES INC. APPLIANCE WIRING MATERIAL
Subj. 758 Section 1 Page 1569 Issued: 1972-09-26
Revised: 2003-09-17
Style 1569 PVC Insulated Wire.
______________________________________________________________________________
Rating 80°C, 90°C or 105°C, 300 Volts.
______________________________________________________________________________
Conductor No. 30 through 2 AWG, stranded or solid. and Insulation Thermoplastic PVC Minimum Minimum Average Thickness at Thickness any point AWG Size mils mils 30 - 10 15 13 9 - 2 30 27 |
_____________________________________________________________________________
Covering Optional - PVC, minimum average thickness 9 mils,
minimum thickness at any point 8 mils.
______________________________________________________________________________
Standard Appliance Wiring Material UL 758.
______________________________________________________________________________
Instructions Detailed Examination.
to UL Physical Properties, Unaged, Class 43.
Representative Spark Test.
______________________________________________________________________________
UL (4) Detailed Examination.
*Counter-Check (4) Physical Properties.
Program (4) Heat Shock.
(4) Cold Bend.
(4) Deformation.
(12) Horizontal Flame Test.
______________________________________________________________________________
Marking General.
______________________________________________________________________________
Use Internal wiring of appliances or electronic equipment
where not subjected to movement or mechanical damage.
Tag may also indicate the following, "600 Volts
Peak for Electronic Use Only."
ksmallcat --- 2007-10-23 07:46:18
4
芝麻开门了 --- 2007-10-23 11:00:01
5
导体结构上,标准没有具体要求,只要截面积达到以下要求即可!
另绝缘需要达到3楼的标准要求!
Size of conductor AWG | Diameter of soild conductor | Cross-sectional area of stranded conductor | ||||||
Nomianl | Minimum | Nomianl | Minimum | |||||
Mils | (mm) | Mils | (mm) | Mils | (mm) | Mils | (mm) |
18 | 40.3 | 1.02 | 40.0 | 1.016 | 1620 | 0.823 | 1588 | 0.807 |
ailiyan --- 2012-07-27 11:23:17
6