UL標准系列電線電纜印字規范
1. 常見印字方式有:
2. 印字標志間距:
3. 印字表面牢固性試驗:
4. 印字內容
4.3多重電線(Multiple – rated Cables)的表面標識方法:
4.4 AWM線材一般其基本構成包括:
5. 常規燃燒等級(印字標識簡介)
[辉熊 在 2007-8-30 16:37:53 编辑过]
有币才能看到呢, 我没有币

47 Surface Marking of AWM
47.1 Surface marking is not required for appliance wiring material.
47.2 When surface marking referencing ²AWM² is used, the marking shall contain the following elements:
a) Wire/cable designation: ²AWM.²
b) Name of the organization responsible for the AWM, trade name, other applicable mark, or
file number. When the organization responsible for the AWM produces AWM in more than one
location, an additional distinctive marking shall be provided that identifies the specific
manufacturing location of the AWM.
Other markings such as wire size, number of conductors, and similar data, are determined to be in
compliance with this requirement when they are not confusing or misleading.
47.3 For a cable that contains a conductive polymeric shield, the jacket or marker tape shall be marked
²Conductive Shield,² ²Contains Polymeric Conductive Shield,² or equivalent.
本来是想下载的可下载的时候却提示:该文件已被删除或改名字
下载不到

好资料,现有AWM线一般都有印VW-1,实际UL中好多型号不要求这样严,可取消。会省很多事。
yuzeliang:
本来是想下载的可下载的时候却提示:该文件已被删除或改名字
下载不到

我也是啊
下不了哦!是不是删除了资源啊!能不能重新上传啊!楼主!先谢啦!
我怎么打不开啊 ,能不能给我看一下啊 ,这位大哥

楼主是不是有问题,这样的资料也要、卖20G!
是不是有心在这互相学习和交流呀。
不是吧,要这么多K。
可不可以将发我的邮箱啊 Leene@126.com
下不到呀,哥哥
可否发一份过来呢?
chen683687@163.com
這個資料有誤,不能使用了。。。。請LZ能修改下。。。。
有币才能看到呢, 我没有币<IMG src="http://www.dxdlw.com/images/Emotions/54.gif" onload="javascript:if(this.width>800)this.width=800;if(this.height>600)this.height=600;">
JB要这么多
