aazhumeng --- 2013-02-21 16:50:28

1

晨曦1394 --- 2013-02-21 16:56:09

2

APPLIANCE WIRING MATERIAL

Subj.758	Section 2	Page 20237	Issued:1984-08-24
			Revised:2008-05-27

Style 20237

Jacketed Cable

Rating

125 deg C, 300 Vac, Cable flame.

Conductor

36 AWG min. Solid or Stranded.

Insulation

Labeled or complying with manufacturer's AWM Procedure. The designations of all styles of individual conductors used in making up the cable assembly shall be available.

Assembly

Two or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Shield

Optional.

Covering

Optional - 4 mil or heavier wall of PVC or other thermoplastic covering may be extruded over the conductor assembly or groups of conductors (with or without shields).

Jacket

TPE - See Facing Page for Compound Designation

dia of cable under jacket of 0.700 inches or less*	30 mils min average	24 mils minimum at any point
0.701-1.000 dia	45 avg	36 min
1.001-1.500 dia	60 avg	48 min
1.501-2.500 dia	80 avg	64 min
2.501-4.000 dia	110 avg	88 min
4.001 dia and larger	140 avg	112 min

*Major dia if cable is flat or oval.

Standard

Appliance Wiring Material UL 758.

Marking

General.

Use	External interconnection of electronic equipment.

UL and the UL Logo are trademarks of UL LLC © 2013