首页 > 国外线缆

[问题求助] ul有没有限制2464印字间距?

P:2012-03-19 11:58:18

1

客户想要2464 2C和3C线,已经打样寄样。但是现在要求把印字间距拉大,就是两串印字之间的间距拉大。
请问可否通过一个印字轮上只刻一串字符来拉大。这样还违反UL规定否?

colour coder - 彩色电视信号编码器,色码器 (0) 投诉

P:2012-03-19 13:31:44

2

沒有特別的要求吧

MLM - multi-longit udinal mode多纵模 (0) 投诉

P:2012-03-19 14:29:12

3

這個沒有要求啊

b.m.p. - brake mean pressure平均压力 (0) 投诉

P:2012-03-19 15:42:40

4

在UL要求的印字距离规定的范围之类即可。

flexing - 卷绕 (0) 投诉

P:2012-03-19 16:00:08

5

間隔都是不大於1m

switching surge over voltage - 开关冲击电压 (0) 投诉

P:2012-03-19 16:28:48

6

这个没有要求的

reaction tank - 反应槽 (0) 投诉

P:2012-03-20 19:51:15

7

UL没有规定印字的距离。

除非你还印上其他非UL要求的字体,那就有至少1/4寸的距离规定(如果没记错)。

hard clad fiber - 硬包层光纤 (0) 投诉

P:2012-04-21 19:16:45

8

这个好像是没有要求

saponification - 皂化 (0) 投诉

P:2012-04-22 10:11:39

9

准确的说,758印字间距不可超过40INCH(1.02m),具体的标准如下:UL758FUIIL22 _L22

As specified in UL 758, the date marking of the cable may be printed
legibly on the cable, in lieu of printing on the tag. Tags will state “See
Surface Print for Manufacturing Date”. The date code shall follow the “month
and year” or “month, day and year” sequence (e.g. “10/01”, “Oct 01”,
“10/31/01” or “Oct. 31, 01”, etc.), and shall be repeated at intervals of no
greater than 40 inches (1.02 meters) unless otherwise stated in the Follow-Up
Service Procedure. The date shall be shown in plain language, not in code.

laid - 敷设,放置 (0) 投诉

9


你需要登录才能发表,点击登录