ul 20895 材料 - 无图版
JYDLDSJ --- 2008-12-11 17:32:21
1
ul 20895 绝缘和护套材料是什么?
hust --- 2008-12-12 21:53:19
2
UNDERWRITERS LABORATORIES | APPLIANCE WIRING MATERIAL |
Subj.758 | Section 2 | Page 20895 | Issued:1995-08-11 |
| | | Revised:2008-05-27 |
Style 20895 | Jacketed Cable. |
Rating | 90 deg C, 1000 Vac, Cable flame. |
Conductor | 40 AWG min - Material not specified. |
Insulation | Labeled or complies with manufacturer's AWM Procedure. |
Assembly | Two or more twisted singles or groups of twisted singles twisted together. Lay not specified. Barrier layer over cable core or individual singles and/or fillers optional, manufacturer shall maintain a complete description of each assembly. |
Shield | Optional. May be over one or more of the insulated conductors or applied over the assembly. |
Jacket | PUR - See Facing Page for Compound |
dia in inches of 0.425 or less | 50 mils min average | 40 mils minimum at any point |
0.426-0.700 dia | 66 avg | 52 min |
0.701-1.500 dia | 88 avg | 70 min |
1.501-2.500 dia | 120 avg | 96 min |
2.501 dia and larger | 154 avg | 124 min |
Standard | Appliance Wiring Material UL 758. |
Use | As internal wiring or external interconnection of electronic equipment (such as computers and business machines). |
JYDLDSJ --- 2008-12-13 10:56:18
3
我有这个活页,也了解了一些情况,绝缘材料中没有具体规定那种材料,只是说经过Labeled 或符合AWM要求的材料,像交联聚乙烯等材料,我手中有一段国外的样品,分析下来不是XLPE,很薄,35平方的绝缘厚度只有0.8mm,而且表面很滑,亮,硬、是氟制品,
护套是聚氨酯吗?
导体是特软的0.07的,我们怎么做呢?设备?
望高人指点!!!
hust --- 2008-12-13 13:22:45
4
个人感觉绝缘不太可能是氟塑料,因为成本太高,而且要求耐温90度,氟塑料可达200度,有可能是聚酯料,护套是聚氨酯.
-- 结束 --